The home decoration process is various, and the detail is very much. Wallpaper structure is the final method that the house decorates hard outfit, soft attire begins. The wallpaper ought to be in the carpentry, paint, water and electricity, filling all hardware finish, and have been cleaned after one time.
1. Floor and skirting are set up
❖ avoid play keel, saw wood flooring and so on make the wallpaper.
❖ to prevent shock when install the line that play a base, wallpaper and Pure paper Wallpaper metope separation, thus appeared the wallpaper bubbling, become warped edge phenomenon.
❖ to prevent cutting the line that play a base when large amounts of particles pollution and wallpaper bruised.
❖ general putty is usually not batch for the base bottom, first wallpaper can’t cut neatly, at risk of become warped edge, which has a long time lead to the wallpaper into the coils.
❖ to avoid the collection that play a base to get glass glue wallpaper seal up, unable to generate the wall of the water molecules emissions, lead to the line that play a base position wallpaper mildew.
❖ perform crural line, likely wall structure and play crural series straightness is not enough or have crack, the wallpaper has a mask aperture effect.
2 cover and door are set up
❖ install door initially, can stay away from the wallpaper destroyed and getting dirty, also facilitate the repair of paint. Paint mending (gaps in door covers and wall surfaces, as well as stopping lines) will stain the wallpaper if applied effectively.
❖ door size might have a discrepancy, if perhaps small size, wallpaper, initially door will appear clear phenomenon; If fully pasted, it is easy to pull the wallpaper when ever installing the door, leading to problems for the wallpaper.
Solid wood paint can not end up being finished with wallpaper, following making wood paint
❖ because carpentry paint when construction, atomization, the paint will stick on the wallpaper. And when paint construction, want to tackle protecting to finished product, especially the periphery metope such as cabinet, door, partition should stick protective film, if atomize to metope, to the structure quality of wallpaper is definitely not assured, give a problem very easily.
three or more. Air conditioning holes
❖ avoid wallpaper damage of drilling hole.
❖ prevent wall vibrations cause the wallpaper off when striking.
❖ to avoid dust pollution when punching wallpaper.
The holes of the curtain hanging rod include been made in enhance
The position of curtain hanger rod support is very well designed and holes will be made to avoid contaminating the wallpaper surface with late punching. In particular, flocking, silk, deep pressure, special materials such while some difficult to do wallpaper, prior to paste should be made in advance to hang the curtain rod holes.
How to paste the wallpaper
Remove the wall skin: remove the original paint and various other objects for the wall, use gypsum powder to fix the cracked portions of the wall, and apply the bandage after leveling; In the event the sand and dull walls, partition walls, yet also paste glass textile or cloth netting; A few of the low quality partitioning or external walls to reach the insulation result, need to be complete of nail plasterboard.
Trim wallpaper: measure metope elevation first, cut wallpaper span again, have two varieties of circumstance: do certainly not add cut 5 to 8 centimeters by metope height according to metope height left and right sides size, use as up and down repair edge: to pay wallpaper needs to consider the symmetry of design and style, reason cut length should certainly increase according to actual circumstance, can lengthen almost eight to 10 centimeters generally.
Coating adhesive solution: picture glue solution with shell for the back of reducing good wallpaper brush, pay special attention to the full glue around the edge to liquid, in order to ensure the development quality, pasted wall paper and stuff in the face of folding place 5-10 mins (attention, nor the exterior force, in order to avoid wallpaper in crimp, especially it’s ok cloth) completely through the glue liquid into the bottom level of the paper may be posted, besmear brushs number of wallpapers, just about every time and in order to post.
Wall structure paper construction: it can be to be in frequently door edge or hue Angle from go down to paste first wall membrane paper, by scraping panel from go down, by introversion outside, blow paper paper gently, extrude bubble and superfluous glue liquefied, make wall paper is definitely even close to metope.
Before pasting wallpaper, closed off power: when pasting wallpaper, if encounter the place that has power-switch or socket on metope, can turn off total power first, cover wall membrane paper next all electricity supply and socket, lower two diagonals from middle of gravity point, may show 4 small triangular, reoccupy art tool removes all round redundant wallpaper.
Trim cleaning: cut away the extra wallpaper at both equally ends of the top and lower ends, and make the blade well-defined to stop rough edges. Drop in water with cloth or sponge to wipe the glue liquid that remains in the wall paper area completely clean, lest wall paper becomes yellow, following wall paper is dry, if discover a bubble on the surface, cut open up with the knife try out glue liquid again press flat can eliminate (with needle tube better)